Sintered plastic porous body - List of Manufacturers, Suppliers, Companies and Products

Plastic Sintered Porous Body "HDPE (High-Density Polyethylene)"

Developed for gasoline resistance! Mechanical strength, abrasion resistance, and chemical resistance are extremely good.

"HDPE (High-Density Polyethylene)" is a plastic sintered porous material that complies with food sanitation laws and has a small pore diameter of 5 to 15 μm, making it suitable for pre-filtration. It has excellent mechanical strength, wear resistance, and chemical resistance, and has been developed for use as a gasoline-resistant filter for organic solvents and oils. Its wear resistance is also utilized in powder flow plates. Our company manufactures various shapes of porous products made from plastic resins. Plastic sintered porous materials are lower in cost compared to ceramics and metal sintered bodies, and we accept prototypes starting from a single piece. [Features] - Complies with food sanitation laws - Small pore diameter of 5 to 15 μm, suitable for pre-filtration - Utilized in powder flow plates due to wear resistance - Excellent mechanical strength, wear resistance, and chemical resistance - Developed for use as a gasoline-resistant filter for organic solvents and oils *For more details, please refer to the PDF document or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding of porous bodies made of PPS, PEEK, and PEKK resins *Samples available

Exhibits high levels of durability and stability! A plastic sintered porous body effective against heat and chemical resistance.

PPS, PEEK, and PEKK were considered very difficult to mold, but our company has made it possible to mold filters. Due to the low elution levels, they are suitable for analytical filters, and the currently moldable pore sizes are 2μ for PEKK and 10μ for PEEK. We have samples available for filters with sizes ranging from 2 to 5μ. Plastic sintered porous bodies are less costly than ceramics or metal sintered bodies, and we accept prototypes starting from one piece. 【Features】 - Effective heat and chemical resistance - Continuous use temperature is 260 degrees - Very low wear resistance, chemical resistance, smoke generation during combustion, and toxic gas emissions - Hydrolysis resistance and electrical properties - Exhibits high durability and stability among plastic resins *For more details, please refer to the PDF materials or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Sintered Porous Body 'PP (Polypropylene)'

Widely used as a wastewater treatment aeration device! A lightweight plastic sintered porous body with excellent mechanical strength.

"PP (polypropylene)" is a hard plastic sintered porous body. It is lightweight, has excellent mechanical strength, and poses no risk of breakage, making it widely used as an aeration device for wastewater treatment. Our company manufactures various shapes of porous products made from plastic resin. Plastic sintered porous bodies are lower in cost compared to ceramics and metal sintered bodies, and prototypes can be accepted from a single piece. [Features] - Lightweight and excellent mechanical strength - No risk of breakage - Widely used as an aeration device for wastewater treatment - Hard *For more details, please refer to the PDF materials or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spacey Chemical Co., Ltd. Business Introduction

Pioneer of plastic sintering molding, Spacey Chemical Co., Ltd.

Spacey Chemical Co., Ltd. has been a pioneer in the field of plastic sintered porous materials since its establishment in 1966, specializing in the manufacture of sintered porous materials using polymers while chemically addressing voids. Not only can these materials serve as alternatives to ceramic and metal sintering, but we have also cultivated "advanced powder technology" and "innovative sintering technology" to leverage the unique properties of polymer sintering, implementing thorough quality control to meet the diverse needs of our customers. 【Business Activities】 ○ Manufacturing and sales of aeration pipes, filtration materials, filters, etc., made from various plastics. For more details, please contact us or download our catalog.

Company：スペイシーケミカル営業部
Price：Other

plastic
Aeration/air diffusion equipment
Filtration Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Sintered Porous Body 'EVA (Ethylene Vinyl Acetate)'

Since they are spherical pellets, they scatter light in all directions! They are highly flexible and do not damage the coated surface.

EVA (ethylene-vinyl acetate) is a flexible, plastic sintered porous material that does not damage the coated surface. It is easy to color and consists of spherical pellets, which scatter light. Our company manufactures various shapes of porous products made from plastic resin. Plastic sintered porous materials are more cost-effective than ceramic or metal sintered materials, and we accept prototypes starting from a single piece. [Features] ■ Highly flexible ■ Does not damage the coated surface ■ Easy to color ■ Spherical pellets scatter light *For more details, please refer to the PDF document or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Sintered Porous Body 'MMA (Methyl Methacrylate)'

The bubbles are small, and the oxygen solubility in water is high! Suitable for removing chlorine from tap water and removing iron oxide.

"MMA (Methyl Methacrylate)" is a plastic sintered porous body with small bubbles and high oxygen solubility in water. When combined with activated carbon, it is effective for removing chlorine from tap water and iron oxide. Our company manufactures various shapes of porous products using plastic resins. Plastic sintered porous bodies are lower in cost compared to ceramic or metal sintered bodies, and we accept prototypes starting from one piece. [Features] - Effective for removing chlorine and iron oxide from tap water - Small bubbles and high oxygen solubility in water *For more details, please refer to the PDF document or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Sintered Porous Body 'LDPE (Low-Density Polyethylene)'

Excellent workability and soundproofing effect! A soft, easily moldable, and inexpensive plastic sintered porous material.

"LDPE (Low-Density Polyethylene)" is a plastic sintered porous material that has good workability and excellent soundproofing effects. It is soft, easy to mold, and cost-effective. Our company manufactures various shapes of porous products using plastic resins. Plastic sintered porous materials are lower in cost compared to ceramics and metal sintered bodies, and we accept prototypes starting from one piece. [Features] - Soft and easy to mold - Cost-effective - Good workability - Excellent soundproofing effect *For more details, please refer to the PDF document or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Sintered Porous Body 'UHMW PE'

The possible size for production is 750×1000×20t! It is used for powder flow plates, taking advantage of its wear resistance.

"UHMW PE (Ultra High Molecular Weight Polyethylene)" is a plastic sintered porous body with solvent resistance. It is used in powder flow plates, taking advantage of its wear resistance. The sizes that can be produced are 750×1000×20t, and the pore sizes that can be produced range from 5 microns to 80 microns. Our company manufactures various shapes of porous products made from plastic resins. Plastic sintered porous bodies are lower in cost compared to ceramics and metal sintered bodies, and prototypes can be accepted from a single piece. 【Features】 ■ Used in powder flow plates, leveraging wear resistance ■ Has solvent resistance ■ Size that can be produced: 1000×1000×20t ■ Pore sizes that can be produced: 5 microns to 80 microns *For more details, please refer to the PDF document or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic sintered porous body PTFE (polytetrafluoroethylene)

The achievable pore size is 5 to 100 microns! A resin that is widely expected to be used for corrosion-resistant filters and fire-resistant adsorbents.

PTFE (Polytetrafluoroethylene) is a plastic sintered porous body that allows for the composite sintering of various metal powders. Fluororesins can withstand continuous use temperatures of up to 220 degrees, and they excel in chemical resistance and heat resistance compared to ceramic and metal sintered bodies. Our company manufactures porous products in various shapes using plastic resins. Plastic sintered porous bodies are more cost-effective than ceramic or metal sintered bodies, and we accept prototypes starting from a single piece. 【Features】 ■ Can withstand continuous use temperatures of up to 220 degrees ■ Excellent chemical and heat resistance ■ Widely expected applications from pharmaceutical filters to corrosion-resistant filters and fire-resistant adsorbents ■ 40-50% of the entire product is occupied by pores ■ Composite sintering of various metal powders is also possible *For more details, please refer to the PDF document or feel free to contact us.

Company：トーメイ工業
Price：Other

Other polymer materials
others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sintered plastic porous body - List of Manufacturers, Suppliers, Companies and Products

Sintered plastic porous body Product List